It is important to know that almost all wireless sensors have power saving settings inside the sensor to make battery live as long as possible.

Every time your sensor pick up an intrusion it transmit a trigger signal to your alarm, even if your alarm is not armed. This unnecessary wireless transmission tuses unnecessary power.

The power saving mode make the sensor send wireless signals less often when not necessary. You can set your sensor to send a signal every time it detects an intrusion (best way to test your detector) or to wait 5 seconds, 50 seconds or 5 minutes between transmissions. If you, as an example, set the detector on 50 seconds it will wait 50 seconds before it will send another signal. Setting the setting to 5 minutes will have the best battery saving option but it can seem as if the sensor do not work because of the long time delay.

 5 Minutes might seem a long time but how long does it take one to go to bed or leave the house from the time you actually armed the alarm? In many cases more than 5 minutes. If that is the case the 5 minutes delay will work very well for you and make your sensor batteries last much longer than normal. A 5 minute delay is ideal for very heavy traffic areas like living rooms and 50 seconds delay for low traffic areas like bedrooms.

Pin It on Pinterest